Combustion Program Controller Burner Control Box for Gas Burners Accessories Box Controller Kme11.230c2

• Usage: Hydrogen, Nitrogen, Ng and LPG
• Purpose: Control Gas
• Parts: Burner Controller
• Application Fields: Industrial Gas Burner
• Noise Level: Low
• Machine Size: Medium
• Model NO.: KME11.230C2
• Condition: New
• Certification: ISO, CE
• Name: Burner Controller
• Model: Kme11.230c2
• Brand: Jate
• Power Supply: 230V 50/60 Hz.
• Tsamax: 3s
• Weight: Less 1kg
• Color: Black
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Shipping Term: DHL/UPS/FedEx/TNT
• Transport Package: Carton
• Specification: 11*8*7cm
• Trademark: JATE
• Origin: China
• HS Code: 8302600000
• Production Capacity: 1000

Product Description

                  MADE IN CHINA-JATE

Combustion Program Controller Burner Control Box For Gas Burners Accessories Gas Burner Controller KME11.230C2

Product Description

Application:

KME...for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. flame monitoring Pass ionization bar or flame detector QRA and auxiliary equipment AGQ3 or use blue flame detector QRC. according to the shell Dimensions, KME... Same burner controller as LGB and LMG

PRODUCT SPECIFICATIONS

item	value
Condition	New
Warranty	1.5 years
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Construction works , Energy & Mining, Advertising Company
Weight (KG)	Less 1kg
Showroom Location	None
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Place of Origin	China
Brand Name	JATE
Type	Gas Burner
Product name	KME22.131C2 Igniter For gas Ignition Control Burner Controller
Brand	JATE
Model	KME22.131C2
Color	Black
Power supply	230V 50/60 Hz.
Power consumption	approx. AC 3.5 VA
Ambient Temperature	-20...+60 °C
Humidity	< 95 % r.h.
Degree of protection	IP 40, with the exception of  the connection area
Application/Usage	Gas Burners Industrial Accessories

Detailed Photos

Combustion Program Controller Burner Control Box For Gas Burners Accessories Gas Burner Controller KME11.230C2

Features:

Combustion control according to EN 298 Strong exhaust burner according to EN 676 Undervoltage detection Monitor air pressure during startup and operation with an air pressure switch Convenient remote reset Various colors display information on error status and operating status A limited number of repetitions Precise control sequence due to the use of digital signal processing After 24 hours of continuous operation, it must be stopped once

 

 

Installation Precautions:
The controller unit and other cables must be installed separately from the high voltage ignition cables.
Do not confuse phase and neutral.
Install switches, fuses, grounding, etc. in accordance with local regulations.
Connection diagram showing the application of a grounded neutral wire to the burner control. Ionization current monitoring in the network without connection In the case of a ground conductor, terminal 2 must be routed through an RC unit (Type: ARC 4 668 9066 0). Connect the ground wire. Local regulations must be followed (e.g. protection against electric shock) Because the mains voltage of AC 230 V / 50 Hz produces a current leakage of up to 2.7 mA.
Verify that the maximum amount of current allowed by the terminal is not exceeded.
Do not supply an external mains voltage to the control output of the combustion controller, when the test unit controls the combustion controller (fuel valve, etc.), LME do not connect.
In the absence of a fan, the AGK25 must be connected to terminal 3, otherwise the burner will not start reliably.
  For safety, connect the neutral conductor to terminal 2. As shown below, the burner components (fan, ignition compressor, air valve) must be connected to the neutral conductor. The connection between the neutral conductor and terminal 2 is at the control unit The bottom is pre-wired.

Electrical installation of flame detectors:
To exclude interference, it is important to avoid losses in signal transmission:
1.Do not install the detector wires together with other wires - Line capacitance reduces the level of the flame signal - Use a separate cable
2.Check the maximum permissible length of the detector wiring (refer to the «Technical Manual»)
3.The ionization bar is not protected against the risk of electric shock
4.Locate and confirm the location of the ignition electrode and ionization probe so that the ignition spark does not pass over the ionization rod (danger of electrical overload) and checks that affect ionization
5.Insulation resistance - Minimum resistance between ion bar and ground is 50 M- Contaminated detector mounts reduce insulation resistance, thereby supporting creep currents The wiring of the burner should comply with the relevant regulations; grounding the boiler alone is not sufficient

 

Recommend Products

 

 

 

Combustion Program Controller Burner Control Box For Gas Burners Accessories Gas Burner Controller KME11.230C2