Kromschroder Original IC20-07W2t Original Voltage Stabilizer Servo Motor Industrial Burner Electric Actuator

• Customization: Available
• Certification: CE, ISO
• Customized: Non-Customized
• Surface Treatment: Natural
• Fuel: Gas
• Range of Applications: Industrial
• Type: Servo Motor
• Name: Servo Motor
• Deliver Time: 3~15days
• Term of Payment: EXW/Fob
• Use: Gas Burner Accessories
• Model: IC20-07W2t
• Transport Package: Carton
• Specification: 270(W)*120(H)*120(L)mm
• Trademark: Kromschroder
• Origin: Germany
• HS Code: 8302600000
• Production Capacity: 100

Product Description

Wholesale Price Original Kromschroder Servo Motor Damper Actuator IC20-07W2T For Industrial Burner

OVERVIEW    

PRODUCT PARAMETERS

Name	Servo motor
Brand	Kromschroder
Model	IC20-07W2T
Origin	Germany
Deliver Time	3~15 days
Usage	gas burner accessories

  

Analog inputs
General Linearity <5% of the control range Control range 0...90° or 0...135°, depending on type Voltage setpoint DC 2...10 V X1-1 (U-IN), X1-2 (GND)
- Umin DC 2 V
- Umax DC 10 V Input impedance ≥5 k Current setpoint DC 4...20 mA X1-3 (I-IN), X1-2 (GND)
- Imin DC 4 mA - Imax DC 20 mA Input impedance ≤500 Impedance setpoint 0...135 X1-4, X1-5, X1-6 (GND)
- RNominal 135 ±5%

RECOMMEND PRODUCTS

 

WARNING

1,Do not install it in the following places
(1)Places where special drugs or corrosive gases are present (e.g. ammonia, sulfur, hydrochloric acid, ethylene compounds, etc.)
(2)Places where water drops or is too wet.
(3) High temperature places.
(4) A place where the vibration lasts for a long time.
2, Please connect according to the specified basis.
3, In order to prevent electric shock and meter damage, please connect the power supply last. Misunderstanding that touching other subterminals can cause accidents and damage to the meter.
4,The load of each terminal connection should not exceed the rated value.
5,Please use the power supply with the same voltage and frequency as indicated by the machine.
6,For timers and auxiliary relays used as additional functions, please select reliable products and correctly form loops according to your needs.
7,Please ground according to the standard above D type grounding specified in the electrical equipment technical standard, and be sure to ground the burner body.
8,Do not tie the power cord and the high-voltage cable of the ignition transformer with the wire of the flame monitoring rod, and do not put it in the same wire tube, please wire separately.In particular, the high-voltage cable should be distributed separately, 10 cm away from the burner controller Above.
9,Please connect the ignition transformer high-voltage cable reliably to ensure that there is no bad contact. Poor contact will produce high frequency waves, radio noise, etc., causing misoperation. In addition, install the ignition transformer directly with the burner body or the metal part electrically connected to the burner body.
10,After connecting cables, ensure that the cables are correctly connected. Incorrect wiring may damage the unit or cause incorrect actions.

ABOUT US