Factory Direct Giuliani Bleed Safety Ms25 Burner Control Valves Supplier Offering Competitive Factory Price for Boilers and Accessories

• Customization: Available
• Application Fields: Industrial Gas Burner
• Certification: CE, ISO
• Model NO.: MS25
• Condition: New
• Noise Level: Low
• Parts: Bleed Valve
• Purpose: Control Gas
• Name: Bleed Valve
• Model: Ms25
• Brand: Giuliani
• Part Number: 002.0004.001
• Max Inlet Pressure: 6 Bar
• Weight: 3 Kg
• Suitable for Manufactured: Gas, Natural Gas, LPG
• Operating Temperature Range: -10/60°C
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Usage: Hydrogen, Nitrogen
• Machine Size: Medium
• Transport Package: Carton
• Specification: 18*10*15cm
• Trademark: Giuliani
• Origin: Italy
• HS Code: 8481100090
• Production Capacity: 1000
• Package Size: 35.00cm * 20.00cm * 30.00cm
• Package Gross Weight: 3.000kg

Product Description

Italy Giuliani OR Bleed Safety Valvs MS25 Burner Control Valves The Electromagnetic For Valve Industrial Gas Combustion

Product Description

Description:

Aluminium relief valve. Max. inlet pressure 2 bar. Suitable for manufactured gas, natural gas, liquefied petroleum gas (LPG),non-aggressive gas and air.Operating temperature range: -10÷60°C.

 

Installazione:

MS series relief valves comply with Directive 2014/34/EU (ATEX directive) as Equipment in Class II 2G and Class II 2D; They are therefore suitable for installation in zones 1 and 21, and more suitable for zones 2 and 22 classified in Annex I of Directive 99/92/EC. The safety valve in question is not suitable for use in zones 0 and 20 as defined in Directive 99/92/EC. To determine the eligibility and extent of the danger zone, see EN 60079-10. Difiolo valve if installed and maintained .According to the conditions and instructions set out in the attached technical document, it does not constitute a source of danger Specific. In particular, the device provides for the discharge of substances into the atmosphere under normal operating conditions Flammable, as in an occasionally explosive environment. The relief valve is fitted with a diaphragm Work and safety; Safety diaphragm ensures gas leakage in case of rupture of working diaphragm The flow rate shall not exceed 30 dm3 /h. Only if both membranes break at the same time can we emit atmosphere Continuous explosions, thus causing danger zone 0. If the valve is installed in In unattended places or areas with insufficient ventilation, all precautions must be taken to prevent the valve itself Is the origin cause of region 0. For example, you can bring vents outside through copper tubing to connect to Thread hole G1/8 "and remove brass dust cap. The installation position is indifferent; On the horizontal pipe.It is recommended to keep the valve steering up. It is recommended to follow the following rules:

• Avoid assembling valves by leveraging sleeves;

• Ensure that pipes are properly aligned and have no internal damage

 

Calibration :

1. Check that all the utilities are off.

2. Screw down the relief valve adjusting screw completely.

3. Slowly open the on/off valve upstream of the system.

4. Increase the pressure downstream of the regulator by turning the adjusting screw until the required pressure for the breather is reached.

5. Slowly unscrew the relief valve adjusting screw until gas begins to escape.

6. Restore the initial regulator outlet pressure.

7. Screw on the plastic safety caps on the screws that adjust the regulator and the relief valve.

 

Maintenance :

The relief valves do not require any special maintenance. In the event of a fault, run a general overhaul and relative test on site. Periodically check the working efficiency of the entire safety system by increasing the regulator pressure until the device is triggered. If the valve must be disassembled for any reason, make sure there is no pressure in the circuit.

 

PRODUCT SPECIFICATIONS

item	value
Condition	New
Warranty	1.5 years
Applicable Industries	Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Printing Shops, Construction works , Advertising Company
Weight (KG)	1
Showroom Location	None
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Place of Origin	Italy
Brand Name	Giuliani
Type	Oil Burner
Product name	Italy Giuliani OR Bleed Safety Valvs MS25 Burner Valves
Model	MS25
Brand	Giuliani
Color	Silver And Grey
Part Number	002.0004.001
Max inlet pressure	6 bar
Suitable for manufactured	gas, natural gas,LPG
Operating temperature range	-10/60°C
After Warranty Service	Video Technical Support
Application/Usage	Gas Burners Industrial Accessories

Detailed Photos

Italy Giuliani OR Bleed Safety Valvs MS25 Burner Control Valves The Electromagnetic For Valve Industrial Gas Combustion

Recommend Products

 

 

Italy Giuliani OR Bleed Safety Valvs MS25 Burner Control Valves The Electromagnetic For Valve Industrial Gas Combustion