Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

Guangdong JATE Burner Co.,Ltd
  • Audited Supplier
  • 4 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • Precise Air/Gas Ratio Control: Maintains constant 1:1 air/gas ratio with high precision regulation over entire range.
  • Low Maintenance Design: Ratio regulators require no routine maintenance; only overhaul recommended if fault occurs.
  • High Sensitivity Mechanism: Guaranteed by compensation diaphragm and springs that offset shutter weight for maximum sensitivity.
  • Continuous Flow Regulation: Allows continuous and gradual pressure regulation without replacing differently drilled screws.
  • Robust Material Construction: Aluminum body with internal parts in aluminum, steel, brass, and NBR rubber membranes.
  • CE and ISO Certified: Product meets CE and ISO certification standards for industrial safety and quality.
  • 1.5 Years Warranty: Comprehensive 1.5-year warranty coverage with video technical support for after-sales service.
  • Flexible Customization: Supports OEM/ODM services, full customization, and minor customization options.

Product Images of Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts pictures & photos
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
  • Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
    Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

Find Similar Products

Product Description

Giuliani New And OR GAVR 25 Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts

Product Description

Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Introduction:
If installed and maintained as per the conditions and instructions given in the enclosed technical manual, the regulator is not a source of specific danger. In particular, under normal operating conditions, the device only rarely emits inflammable substances such as to generate an explosive atmosphere. The air/gas ratio regulator can be installed solely on horizontal pipes and with regulation cap facing downwards. Keep to the gas flow direction indicated on the body of the regulation valve. The device must be fitted onto the system with suitable tools to be inserted into the hubs of the in and out holes. It is strictly forbidden to fit the regulator by levering on the sleeve of the top cover. A suitable gas filter must be installed upstream of each system. Make sure that the pipes are clean and aligned so that the regulator is not su bject to stress.
Ensure the installed regulator is not touching plastered walls.Check that the regulator is suited to the intended use. The impulse intake for the control air connection (threaded hole G¼") should be connected, via copper pipe with diameter of not less than 4 mm, downstream of the air regulation elements with distance from them normally equal to 5 times the diameter of the pipe.
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

DATI TECNICI

Attacchi filettati: UNI EN10226-1
Attacchi flangiati: EN 1092-4
Campo di pressione d'ingresso: da segnale di pressione +20mbar fino a 200 mbar
Segnale di pressione (aria): da 2 a 120 mbar
Rapporto di pressione aria/gas: 1:1
Minimo differenziale tra ingresso e uscita: 20 mbar
Massimo differenziale tra ingresso e uscita: 150 mbar
Raccordo linea aria: Rp ¼"
Temperature limite ambiente: -10°--+60°C
Combustibili: gas città, metano, GPL; gas non aggressivi.
Caratteristiche costruttive: compensazione della pressione di entrata,
attacco impulso interno. Vite di regolazione flusso minimo. Guarnizione di
tenuta per chiusura a zero. Prese di pressione in entrata, uscita e attacco
aria su tutti modelli.
Materiali: corpo in alluminio; parti interne in alluminio, acciaio, ottone e
materiali sintetici; membrane e guarnizioni in materiale a base di gomma NBR.
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
GENERAL FEATURES
 
The task of the GAVR ratio regulators is to maintain the air/gas ratio constant and to regulate the pressure to the burners. The ratio valve allows the pressure to be regulated continuously and gradually with high precision over the entire range of values at outlet. The by-pass screw built into the regulation system is for managing the minimum gas flow with continuous regulation without the need for replacing differently
drilled screws.
 The ratio regulator is driven by the pressure received from the air feed line. It regulates the outlet gas pressure with the control air pressure with a ratio of 1:1. The flow is thus completely managed via the air regulation device.
Any variations in flow due to the operation of the burner produce the same effect both on the gas and air pressure, thus maintaining the ratio constant.
GAVR's high capacity for regulation is guaranteed by the compensation diaphragm on which the inlet pressure acts and by the springs that exactly offset the weight of the shutter system, ensuring maximum sensitivity.

 

SETTING

The outlet pressure calibration is regulated by turning the adjusting pressure, and clockwise
to increase it. This regulation must be made with the air control line connected and burner operating.
In order for the device to operate correctly, the minimum difference between inlet and outlet pressure must be above 20 mbar whereas the maximum difference must be lower than 150 mbar.
 The pressure pipes upstream and downstream of the regulator and on the control air line (fig. 1-2) allow to measure the relative pressure levels .so that the device can be easily cal brated. The screw (fig. 1-2) for calibrating the device minimum load is built into the regulation system. For correct regulation, completely unscrew in an anticlockwise direction until the screw locks mechanically - in this position
there is no minimum gas flow. Slowly tighten the screw (fig.1-2) clockwise until the required value.

 

MAINTENANCE

Ratio regulators do not require any maintenance. In the event of a fault, a general overhaul and relative test are recommended on the manufacturer's premises.
PRODUCT SPECIFICATIONS
item
value
Condition
New
Warranty
1.5 years
Applicable Industries
Building Material Shops, Machinery Repair Shops, Food & Beverage Factory, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
Weight (KG)
2
Showroom Location
None
Video outgoing-inspection
Provided
Machinery Test Report
Provided
Place of Origin
Italy
Brand Name
Giuliani
Type
Gas Burner
Product name
Giuliani GAVR 25 Anello Air/Gas-fuel Ratio Regulator Control Valves
Model
GAVR 25
Brand
Giuliani
Color
Silver
Body Size
1" DN25 FNPT
Operating temperature range
-10--+60°C
max. inlet pressure
0.2Bar
Max. air inlet pressure
120mbar
Application/Usage
Gas Burners Industrial Accessories
After Warranty Service
Video technical support

Detailed Photos

Giuliani New And OR GAVR 25 Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

Recommend Products

 

Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

 

Giuliani New And OR GAVR 25 Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts
Giuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner PartsGiuliani New and or Gavr 25 Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Gas Burner Parts

About the Supplier

This supplier has been audited by BV. Verify the report on the official BV website with ID "MIC-ASI262546". Items marked "verified" are certified.

Watch Video
Watch Video
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd
Guangdong JATE Burner Co.,Ltd

About Our Factory & Business Background

verified Business Type
Manufacturer/Factory & Trading Company
Address
No. 101, Buiding C16, Zone C, Gaoshengxihuzhigu, Hongling Third Road, Shuikou Street, Huizhou, Guangdong
verified Plant Area
5567 square meters
verified Number of Employees
47
verified Registered Capital
10,000,000 RMB
verified Terms of Payment
LC, T/T, D/P, Western Union, PayPal, Small-amount payment
verified International Commercial Terms(Incoterms)
CIF, FOB, CFR, EXW
verified Average Lead Time
Peak Season Lead Time: within 15 workdays, one month
Off Season Lead Time: within 15 workdays, one month
verified Nearest Port
Shenzhen Port, Guangzhou Port
verified Minimum Order Quantity
1 PCS
verified Supply Chain Partners
30

Our Production Capability & Technical Expertise

verified Main Products
Industrial Burner, Combustion Chamber, Gasifier, Infrared Gas Burner, Oil Pump, Burner Controller, Flame Detector, Damper Actuator, Regulator, Butterfly Valve
verified Production Lines
2
verified Production Machines
Bending Machine, Cutting Machine, Laser Cutting Machine, Testing Machine, Welding Machine
verified QA/QC inspectors
2 people
verified Inspection Type for Finished Products
100% inspection(Visual inspection & Function inspection)
verified Inspection Method for Finished Products
Have instructions and uniformly followed
verified Customization Options
Customization from Samples, Customization from Designs, Full Customization, Minor Customization, Flexible customization
verified ODM Service Available
Yes
verified OEM Service Available
Yes
verified R&D Engineers
4 people
verified Traceability of Raw Materials
Yes
verified Own Brand
Yes

Our Industry Experience & Global Business Record

verified Year of Establishment
2024-04-15
verified Export Year
N/A
verified Main Markets
Domestic
verified Repeat Buyers Choice
30%~50%
verified Number of Foreign Trading Staff
5
verified Overseas Agent/Branch
No
verified New Products Launched in Last year
Yes

Our Certifications, Standards & Industry Recognition

verified Cooperated with Fortune 500
Yes

FAQ

What is the warranty period for this regulator?
The product comes with a 1.5-year warranty. After warranty service, video technical support is provided.
What is the maximum inlet pressure allowed?
The maximum inlet pressure is 0.2 Bar, and the maximum air inlet pressure is 120 mbar.
Can this product be customized?
Yes, OEM and ODM services are available. Customization options include full customization, minor customization, and customization from samples or designs.
What is the minimum order quantity?
The minimum order quantity is 1 piece.
What is the lead time for delivery?
The average lead time is within 15 workdays during off-season and within 15 workdays to one month during peak season.
What payment terms are accepted?
Accepted payment terms include LC, T/T, D/P, Western Union, PayPal, and small-amount payment.
What materials are used in the construction?
The body is made of aluminum. Internal parts include aluminum, steel, brass, and synthetic materials. Membranes and seals are based on NBR rubber.
Does the regulator require regular maintenance?
No, ratio regulators do not require any maintenance. In the event of a fault, a general overhaul and test on the manufacturer's premises are recommended.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now