Siemens Gas Burner Controller Lme11.330c2 Temperature Control for Industrial Combustion Programmer

• Certification: CE, ISO
• Customized: Non-Customized
• Surface Treatment: Natural
• Fuel: Gas
• Range of Applications: Industrial
• Type: Burner Controller
• Model NO.: LME11.330C2
• Name: Burner Controller
• Model: Lme11.330c2
• Deliver Time: 2~15days
• Term of Payment: EXW/Fob
• Use: Gas Burner Accessories
• Transport Package: Carton
• Specification: 91(W)*62(H)*63(L)mm
• Trademark: Siemens
• Origin: German
• HS Code: 8302600000
• Production Capacity: 1000

Product Description

Siemens Gas Burner Controller LME11.330C2 Temperature Control For Industrial Combustion Programmer

OVERVIEW

   Burner controls for the supervision of 1- or 2-stage gas or gas / oil burners of small to medium capacity, intermittent operation with or without fan.

LME… burner controls are used for the startup and supervision of 1- or 2-stage gas or gas / oil burners in intermittent operation. The flame is supervised by an ionization probe or flame detector QRA… with ancillary unit AGQ3…A27 for gas / oil forced draft burners or blue-burning flames with blue-flame detectors QRC...

PRODUCT PARAMETERS

Name	Burner Controller
Brand	Siemens
Model	LME11.330C2
Origin	German
Deliver Time	2~15 days
Mains voltage	220 V -15 %...240 V +10 %
Degree of protection	IP40
Mains frequency	50 Hz...60 Hz ±6 %

 

Features At a Glance
 

-Undervoltage detection
- Air pressure supervision with functional check of the air pressure switch during
startup and operation
- Electrical remote reset facility
- Multicolor indication of fault status and operational status messages
- Limitation of the number of repetitions
- Accurate control sequence thanks to digital signal handling
- Controlled intermittent operation after 24 hours of continuous operation

 

 

Legend

tw         Waiting time

1)          Max. running time available for actuator «SA»

TSA      Safety time Actuator running time must be shorter

t1          Prepurge time

2)          t22 + response time of flame relay

t3          Preignition time

3)          Approx. 180 s

t3n        Postignition time

4)          Only used for AC 230 V

t4          Interval between ignition «Off» and release of «V2»

t10        Specified time for air pressure signal

t11        Programmed opening time for actuator «SA»

t12        Programmed closing time for actuator «SA»

t22        2nd safety time

RECOMMEND PRODUCTS

ABOUT US