Factory Price Original Azbil Servo Motor ECM3000G910C Damper Actuator For Industrial Gas Burner
OVERVIEW
The ECM3000 is an electrically controlled motor used to control various devices in industry.
The product types are divided into 90°rotation angle type for burner controller and cold and warm water,
There are two types of 160° rotation angle type for control valves such as steam. Type of input signal
There are relay contacts, 4 ~ 20mADC and potentiometer (nominal 135Ωresistance input) 3 types.
The power supply voltage can be AC24V, AC100V, AC200V, 4 ~ 20mA
The DC input type also has an AC85 to 264V free power supply type.
PRODUCT PARAMETERS
| Name |
Servo Motor |
| Brand |
Azbil |
| Model |
ECM3000G910C |
| Origin |
Japan |
| Deliver Time |
2~15 days |
| Power |
200-240V, 50-60HZ |
| Temperature Range |
-10~+60ºC |
| Weight |
3KG |
Precautions for use • Keep the duty ratio (operating rate) of the high-speed motor type below 40%. • Do not use the ECM3000F type connected to a mechanically balanced relay (R9107A, R927C, etc.). Because a voltage higher than the allowable value is applied to the potentiometer of the ECM3000, it may cause malfunction. • Please perform non-voltage wiring to the S, CONT, CW, and CCW terminals of the ECM3000 with forced opening and closing function. For M744 and M7284, AC24V may be applied to S, CONT, CW, CCW terminals. When changing to ECM3000 with forced opening and closing function, please pay attention not to apply AC24V to each terminal, otherwise it may cause circuit failure • For ECM3000F and ECM3000D, please control the leakage current generated by the protective snubber circuit of the motor drive device (relay, SSR) within the following range according to each power supply voltage. • AC100V : 0.8mA(RMS) or less • AC200V : 0.4mA(RMS) or less.
Audited Supplier 
){kind=link}
){kind=link}