Azbil AUD15c1000 Flame Detector High Performance UV Sensor Special Socket for Photocell Unit

• Name: Flame Detector
• Model: AUD15c1000
• Brand: Azbil
• Climatic Conditions: Class 3K3
• Weight: 1kg
• Color: Black
• Model NO.: AUD15C1000
• Allowable Pressure: 35kpa
• Save Ambient Temperature: -20~+70ºC
• Use Ambient Temperature: -20~+120ºC
• Installation Altitude: Max. 2,000 M Above Sea Level
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Shipping Term: DHL/UPS/FedEx/TNT
• Transport Package: Carton
• Specification: 29.5*14*8.5cm
• Trademark: Azbil
• Origin: Japan
• HS Code: 8403900000
• Production Capacity: 1000

Product Description

AZBIL AUD15C1000 Flame Detector High Performance UV Sensor Special Socket For Photocell Unit

Product Description

Summary:

The high-performance UV sensor AUD100 series is a special socket installed in the AUD15 photocell unit for intermittent operation to monitor the flame combustion of oil and gas burners. Depending on the wiring or installation conditions, you can choose from two types: the lead wire type AUD100C and the terminal block type AUD110C.

 

Specialty
·Excellent environmental resistance - Ambient temperature: 120ºC - IP65 protected construction ·The maximum wiring distance is 200m.

Precautions:

(1) The flame detector plays an important role in monitoring the safety of the burner flame. Please read the instruction manual carefully and use it correctly.
(2) Do not install in the following places: · Locations where special chemicals or vapors are present (ammonia, sulfur, chlorine, vinyl compounds, acids, and other corrosive gases) · Locations subject to prolonged vibration
(3) Take appropriate measures when using it in an ultraviolet source and environment other than flames. Also, do not use this unit to detect ultraviolet rays other than the burner.

(4) Be sure to turn off the power supply before wiring. If you accidentally touch other terminals, it will not only cause damage
or malfunction of the machine, but also may cause electric shock. (5) The flame detector has polarities, so please wire correctly
according to the terminals (F terminal, G terminal) marked on the product. When wiring with the included cable, connect the blue
lead to the F terminal sub, the white wire is connected to the G terminal. (6) When transporting and storing the machine, please
use the special packing box. (7) The signal cable of the flame detector should not be placed in the same piping with multiple
signal cables or power cables, but must be routed separately. (8) Please connect the high-voltage cables of the ignition
transformer securely to avoid poor contact. Poor contact will generate high-frequency electromagnetic waves, interfere with radio
communications, generate noise, and cause Malfunction. Also, mount the ignition transformer directly to the metal that is
electrically wired to the case. (9) The AUD15 photocell unit is made of glass tube and cannot withstand vibration or impact. In
particular, when transporting the combustion device, be sure to pack it in a special box before transport.

 

Project	Content
Applicable flame	Combustion flame of city gas, natural gas, liquefied gas, kerosene, heavy oil, coke oven gas, hydrogen, chlorine, ammonia, naphtha, ethylene, etc.
Quality	AUD100C	AUD110C
	About 120g (With AUD15 about 140g)	About 120g (With AUD15 about 140g)
Material	Aluminum	Socket part: Aluminum Terminal part: Heat-resistant resin (PBT+GF30) (black)
Insulation resistance	500VDC insulation resistance tester 50MΩ or more (without installing photocell unit)
	(Input location: between each lead wire and the metal part of the socket)	Input location: between each terminal part and the metal part of the socket)
Withstand Voltage	After inputting 50/60Hz sine wave 1500VAC/1min or 1800VAC/1s, it can operate normally (without installing the AUD15 photocell unit)
	(Input location: between each lead wire and the metal part of the socket)	Input location: between each terminal part and the metal part of the socket)
Use Environment Temperature	-20 - +120ºC
Save Environmenr Temperature	-20 - +70ºC
Use Environment Humidity	90%,40ºC
Allowable Pressure	35kPa
Protection Structure	IP65 (JIS C 0920/IEC 60529, but with piping and wiring connected)
Vibration-resistant type	5m/s or less (10~55Hz, 2h each in X, Y, and Z directions)
Installation	G1 (R1, 1-11BSP can be connected)
Wire	AWG#18 (about 1.2mm²) stranded flame-retardant bridged polyethylene insulated wire with a length of about 1800mm (blue, white) attached (only AUD100)AWG#18 (about 1.2mm²) stranded flame-retardant bridged polyethylene insulated wire with a length of about 1800mm (blue, white) attached (only AUD100)
Catheter	G1/2 (1/2-14BSPP can be connected)
Flame Signal Wire Specifications for Extended Distances	Specifications: 600V vinyl insulated wire IV wire 2.0mm², up to 200m
Certifications	CE, UL certification Please confirm the specifications of the combined burner controller

Detailed Photos

 

Recommend Products

 

 

 

AZBIL AUD15C1000 Flame Detector High Performance UV Sensor Special Socket For Photocell Unit