Factory Price Industrial Gas Burner Controller Original Honeywell R4343e1006 for Combustion Heating

• Certification: CE, ISO
• Customized: Non-Customized
• Surface Treatment: Natural
• Fuel: Gas
• Range of Applications: Industrial
• Type: Burner Controller
• Model NO.: R4343E1006
• Name: Burner Controller
• Model: R4343e1006
• Deliver Time: 3~15days
• Term of Payment: EXW/Fob
• Use: Gas Burner Accessories
• Transport Package: Carton
• Specification: 100(W)*160(H)*100(L)mm
• Trademark: Honeywell
• Origin: America
• HS Code: 8302600000
• Production Capacity: 100

Product Description

Factory Price Industrial Gas Burner Controller Original Honeywell R4343E1006 For Combustion Heating 

OVERVIEW

  R4343D and R4343E are essentially switches which, when used with the appropriate sensors, can signal the presence or absence of a flame or ultraviolet (UV) light.

• Flame current meter jack socket permits monitoring of flame signal strength.

• Plug-in mounts onto a subbase for surface mounting. (Housing meets IP40)

PRODUCT PARAMETERS

Name	Burner Controller
Brand	Honeywell
Model	R4343E1006
Origin	America
Deliver Time	3~15 days
Mains frequency	50 Hz...60 Hz ±6 %

 

 

FLAME DETECTOR CHECKOUT
The performance of the relay depends upon how well the flame detector is installed. For guidance on how to properly install a flame detector, consult the burner/boiler manufacturer's instructions and the information packed with the detector. Flame current check The test jack on the face of the relay allows the value of the flame current to be easily measured. Use a Honeywell W136A micro ammeter (or equivalent), which has a plug for insertion into the test jack socket. The expected maximum and minimum values of flame current for the various types of flame detectors are given in the table below together with hints on what to check if the current is unsteady or weak. Note that the following have an influence on flame detector performance. (1)Position, size and burning characteristics of the flame. (2)Ambient temperature at the detector (except flame rod). See detector instruction sheet. (3)Refractory - When refractory temperature exceeds 1370° C12500° F, some ultra-violet radiation may occur. Lower refractory temperatures may affect photocells; see relevant data sheets. (4)Temperatures of sensor Flame rods: ensure suitable rod. Other sensors: see relevant data sheets

 

ELECTRICAL RATING:

ELECTRICAL RATING: 115Vac, 230Vac (+ 10 % to - 15%), 50/60 Hz.

CONTACT: 2 isolated DPDT contacts.

Rating: 2A at 0.65 power factor.
AMBIENT TEMPERATURE LIMITS: -10 to + 60 °C

MAXIMUM RELATIVE HUMIDITY: 90% RH at + 40 ° C.

DEGREE OF PROTECTION: IP40

FLAME FAILURE RESPONSE TIME * Less than one second (standard models).

Other timings available on request.

CLASSIFICATION: OOOOXN

 

RECOMMEND PRODUCTS

ABOUT US