Burner Control Unit Ifd 258-5/1q 120V Gas Combustion Controller Box for Gas Burner Parts

• Customization: Available
• Certification: CE, ISO
• Customized: Non-Customized
• Model NO.: IFD 258-5/1Q
• Surface Treatment: Natural
• Fuel: Gas and LPG
• Range of Applications: Industrial
• Name: Burner Controller
• Model: Ifd 258-5/1q
• Brand: Kromschroder
• Power Supply: 220V 50/60Hz
• Operating Temperature Range: -40ºF-140ºF(-40ºC-60ºC)
• Storae Temperature Range: -40ºF-176ºF(-40ºC-80ºC)
• Weight: 1kg
• Color: Black
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Transport Package: Carton
• Specification: 13X13X9.5 cm
• Trademark: Kromschroder
• Origin: Germany
• HS Code: 8302600000
• Production Capacity: 1000

Product Description

Burner Control Unit IFD 258-5/1Q 120V Gas Combustion Controller Box For Gas Burner Parts

PRODUCT SPECIFICATIONS

Description:

Model	IFD 258-5/1W
Control Way	Open and closed
Air Valve	Gas and valve open at the same time
Rated voltage	110-220V AC, 50/60HZ
Usage	gas burner accessories

 

 

Introduction:

Burner controller IFD 258 Burner direct ignition, continuous operation, conforms to EN746-2 standard Continuous self-check and alarm Option to fail lockout or restart after ignition failure UV monitoring or ionization monitoring Various installation methods, can be installed on DIN rail IFD 258…I Built-in ignition transformer saves installation space Displays program status and flame intensity

Application

Automatic burner control unit IFD 258 ignites

and monitors gas burners. As a result of its

fully electronic design it reacts quickly to vari

ous process requirements and is therefore

also suitable for frequent cycling operation.

It can be used for directly ignited industrial

burners of unlimited capacity. The burners

may be modulating or stage-controlled.

The program status and the level of the flame

signal can be read directly from the unit. The

cut-off point can be set using a potentiom

eter.

The behaviour in the event of flame failure

during operation can be selected using a

switch. Either an immediate fault lock-out or

a restart occurs.

Technical data

Mains voltage for grounded and ungrounded mains:

200 V AC, -15/+10%, 50/60 Hz,

120 V AC, -15/+10%, 50/60 Hz,

100 V AC, -15/+10%, 50/60 Hz,

230 V AC, -15/+10%, 50/60 Hz.

Safety time on start-up tSA: 3, 5 or 10 s.

Safety time during operation tSB: < 1 s, < 2 s.

Ignition time tZ: approx. 2, 3 or 6 s.

Power consumption:

IFD 258: approx. 9 VA,

IFD 258..I: approx. 9 VA + 25 VA during ignition.

Output voltage for valves and ignition transformer = mains voltage.

Contact rating:

Ignition output: max. 2 A, cos j = 0.2,

Valve output: max. 1 A, cos j = 1,

Signalling contacts: max. 2 A, 253 V AC,

Max. number of operating cycles: 250,000.

Max. number of operating cycles:

Reset button: 1000,

Mains button: 1000.

Signal inputs:

Input voltage

110/120 V AC

220/240 V AC

Signal "1"

80 - 126.5 V

160 - 253 V

Signal "0"

0 - 20 V

0 - 40 V

Frequenz

50/60 Hz

Input current signal inputs: Signal "1": typ. 2 mA.

Flame control:

Sensor voltage: approx. 230 V AC,

Sensor current: > 1 µA,

Max. sensor current: ionisation < 28 µA.

Ignition cable:

IFD 258: max. 5 m, recommended < 1 m (with TZI/TGI),

IFD 258..I: max. 1 m, recommended < 0.7 m.

Permissible UV sensors:

Elster Kromschröder models UVS 1, 5 and 6 for ambient tempera

tures from -40 to +80°C (-40 to 176°F).

Valve connections: 1.

IFD 258..I: Ignition voltage: 22 kVpp,

Ignition current: 25 mA,

Spark gap: 2 mm, max. 5 mm.

Fuse in unit: F1: T 3.15A H 250 V pursuant to IEC 127-2/5.

Ambient temperature: -20 to +60°C (-4 to +140°F).

Relative humidity: no condensation permitted.

Enclosure: IP 54 pursuant to IEC 529.

Overvoltage category III pursuant to EN 60730.

Cable gland: M16.

Installation position: any.

Weight:

IFD 258: 610 g,

IFD 258..I: 770 g.

Certification

The IFD 258 complies with the requirements of the following direc

tives and standards:

- Machinery Directive (2006/42/EC)

- EN 298

- Low Voltage Directive (2006/95/EC)

- Electromagnetic Compatibility Directive (2004/108/EC)

Certification pursuant to

- Gas Appliances Directive

- FM

is currently being prepared.

Maintenance cycles

The automatic burner control unit IFD 258 requires little servicing.

Burner Control Unit IFD 258-5/1Q 120V Gas Combustion Controller Box For Gas Burner Parts

 

Technical data

Mains voltage for grounded and ungrounded mains:

200 V AC, -15/+10%, 50/60 Hz,

120 V AC, -15/+10%, 50/60 Hz,

100 V AC, -15/+10%, 50/60 Hz,

230 V AC, -15/+10%, 50/60 Hz.

Safety time on start-up tSA: 3, 5 or 10 s.

Safety time during operation tSB: < 1 s, < 2 s.

Ignition time tZ: approx. 2, 3 or 6 s.

Power consumption:

IFD 258: approx. 9 VA,

IFD 258..I: approx. 9 VA + 25 VA during ignition.

Output voltage for valves and ignition transformer = mains voltage.

Contact rating:

Ignition output: max. 2 A, cos j = 0.2,

Valve output: max. 1 A, cos j = 1,

Signalling contacts: max. 2 A, 253 V AC,

Max. number of operating cycles: 250,000.

Max. number of operating cycles:

Reset button: 1000,

Mains button: 1000.

Signal inputs:

Input voltage

110/120 V AC

220/240 V AC

Signal "1"

80 - 126.5 V

160 - 253 V

Signal "0"

0 - 20 V

0 - 40 V

Frequenz

50/60 Hz

Input current signal inputs: Signal "1": typ. 2 mA.

Flame control:

Sensor voltage: approx. 230 V AC,

Sensor current: > 1 µA,

Max. sensor current: ionisation < 28 µA.

Ignition cable:

IFD 258: max. 5 m, recommended < 1 m (with TZI/TGI),

IFD 258..I: max. 1 m, recommended < 0.7 m.

Permissible UV sensors:

Elster Kromschröder models UVS 1, 5 and 6 for ambient tempera

tures from -40 to +80°C (-40 to 176°F).

Valve connections: 1.

IFD 258..I: Ignition voltage: 22 kVpp,

Ignition current: 25 mA,

Spark gap: 2 mm, max. 5 mm.

Fuse in unit: F1: T 3.15A H 250 V pursuant to IEC 127-2/5.

Ambient temperature: -20 to +60°C (-4 to +140°F).

Relative humidity: no condensation permitted.

Enclosure: IP 54 pursuant to IEC 529.

Overvoltage category III pursuant to EN 60730.

Cable gland: M16.

Installation position: any.

Weight:

IFD 258: 610 g,

IFD 258..I: 770 g.

Certification

The IFD 258 complies with the requirements of the following direc

tives and standards:

- Machinery Directive (2006/42/EC)

- EN 298

- Low Voltage Directive (2006/95/EC)

- Electromagnetic Compatibility Directive (2004/108/EC)

Certification pursuant to

- Gas Appliances Directive

- FM

is currently being prepared.

Maintenance cycles

The automatic burner control unit IFD 258 requires little servicing.

Burner Control Unit IFD 258-5/1Q 120V Gas Combustion Controller Box For Gas Burner Parts

 

 

Kromschroder Burner Controller IFD 258-5/1W Burner Combustion Controller For Industrial Application