Honeywell FT6961-18 IP65 Air Compressor Pressure Switch Antifreeze Brake Switch for Gas Burner Boiler

• Customization: Available
• Type: Industrial Gas Burners
• Number of Switch: Single Control Switch
• Model NO.: FT6961-18
• Structure: Power Built-in Type
• Usage: Control Switch, Playback Switch, Change-over Switch, Gas Burners Industrial Accessories
• Explosion-proof Type: IP 65
• Contact: Normally Close
• Contact Type: Type a Contact
• Detection Method: Retro-reflective Mode
• Brand: Dungs
• Certification: CE, CCC
• Name: Pressure Switch
• Model: FT6961-18
• Cooling of Capillary Coil: 30 Cm (Min.)
• Weight: 3kg
• Voltage Rating: 24...250 VAC
• Degree of Protection: IP 65
• Hysteresis: 2 K
• Ambient Temperature: -15 °c to +70 °c
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Transport Package: Carton Box Packing
• Specification: 16X9X8 cm
• Trademark: Honeywell
• Origin: American
• HS Code: 8481100090
• Production Capacity: 1000

Product Description

Honeywell FT6961-18 IP65 Air Compressor Pressure switch Antifreeze Brake Switch For Gas Burner Boiler

Product Description

GENERAL

Suitable for use as frost-protection thermostats for the protection of downstream air heaters in ventilation and climate control systems as well as heat exchangers in cooling systems. Can also be used to control electrical heating systems and to switch acoustic or optical alarm signals.

FEATURES

• Gas-filled copper sensor element with 1.8 m, 3 m, or 6 m coil length

• Dust-tight micro switch with switching contacts (heat/cool)

• Easy installation and wiring

• Manual reset (FT6960) or automatic reset (FT6961)

• °C and °F scale

 

MOUNTING AND SETTING

The switching temperature can be set by an adjustment screw on top of the housing. The room temperature at the thermostat body should not drop below the setting point. Recommended mounting position is vertical with cable entry on bottom side. For mounting, use the screws (included in the package). To securely mount and to prevent soiling by drilling waste, the mounting holes are enclosed separately. For wiring, remove the cover and proceed as shown in Fig. 2. During the unwinding
operation, the capillary tube must be held by the anti-kink device on the diaphragm pot. Maintain a radius of curvature of at least 20 mm. When inserting the coil through openings in sheet metal housings, provide protection against damage. Use the coil bracket included in the package.

 

WIRING

Field Wiring

Heating: Connect red to blue; the contact will open when the temperature rises.

Cooling: Connect red to white; the contact will open when the temperature drops.

Signal function: For service functions, connect a signal lamp to the corresponding opposite contact. The free contact will then close simultaneously (thus acting as a signal contact).

Reset Function

The FT6960 models are manual reset types. The switching contact is moved back by pressing the reset
button on the front; this must be performed by qualified service personal, only, insofar as resetting necessitates rechecking the unit. The FT6961 models are automatic reset types. The switching contact moves back to its normal position if the temperature moves to normal range.

PRODUCT SPECIFICATIONS

item	value
Warranty	1.5 years
Customized support	OEM
Place of Origin	American
Brand Name	Honeywell
Model Number	FT6961-18
Type	Gas Burner
Feature	High Performance
Power Source	Electric
Application	Industrial Gas Burner
Product Name	Honeywell FT6961-18 IP65 Air Compressor Pressure switch
Model	FT6961-18
Brand	Honeywell
Power Supply	24...250 Vac
Adjustable temp. range	-10...+10 °C (+14...+50 °F)
Cooling of capillary coil	30 cm (min.)
Degree of protection	IP 65
Hysteresis	2 K
Usage	Industrial Gas Burner Accessories
After Warranty Service	Video technical support

Detailed Photos

Honeywell FT6961-18 IP65 Air Compressor Pressure switch Antifreeze Brake Switch For Gas Burner Boiler

Recommend Products