Siemens Agq1.1A27 Gas Burner Ignition Controller Unit Igniter Flame Amplifier for Gas Ignition Control

• Customized: Customized
• Certification: RoHS, CB, CCC, CE
• Brand: Honeywell
• Display Type: LED
• Name: Flame Amplifier
• Model: Agq1.1A27
• Model NO.: AGQ1.1A27
• Color: Black
• Weight: 3kg
• Maximum Ambient Temperature: During Transport and Storage -40...+70 °c
• Power Supply: 220-240V 50/60Hz
• Power Consumption: 4.5 Va
• Degree of Protection: IP40
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Transport Package: Carton
• Specification: 10X20X20 cm
• Trademark: Siemens
• Origin: Germany
• HS Code: 8302600000
• Production Capacity: 1000

Product Description

Siemens AGQ1.1A27 Gas Burner Ignition Controller Unit Igniter Flame Amplifier For Gas Ignition Control

Product Description

Auxiliary unit AGQ1.xA27

• Models available in a series of control ranges, and pressure scales in kPa and psi.

• All models automatically reset
and have an adjustable differential.

•Models have snap switch to open or close a circuit on a pressure rise.

• Case has a clear
plastic cover so setpoints can be observed.

• 1/4 inch-18 NPT connection for pipe on diaphragm assembly.

• Ground screw terminal.
L404F:

• Controllers may be used with steam, air, or noncombustible gases, or fluids noncorrosive to the pressure sensing element.
L404T:XXXX

• High pressure limits, break a circuit on oil pressure rise above setpoint. L404V:

• Low pressure limits, makes a circuit
on oil pressure rise above setpoint

Detailed Photos

Functions

The function diagrams show the required or permissible input signals to the control section and to the flame supervision circuit hatched (refer to Connection diagrams). If these input signals are not present, the burner control will stop the startup sequence to trigger lockout where required by safety regulations.

Preconditions for burner

1.Burner control must be reset startup

2.The contacts of gas pressure switch (GP), limit thermostat /
pressure switch (W), control thermostat / pressurestat ® and safety limit thermostat (SB) must be closed

3.Fan motor (M) or AGK25
must be connected, Heat request present on terminal 12

4.Air pressure switch (LP) must be in its no load position

5.No undervoltage

6.Flame detector darkened, no extraneous light

7.No flame signal, optical flame detector (QRA or QRC) darkened, no
extraneous light

Undervoltage detection

LGB burner controls are capable of detecting undervoltages. This means that load relay (AR) will be deenergized if mains voltage drops below AC 160 V (for nominal AC 220...240 V) or AC 75 V (for nominal AC 100...110 V). The burner control will automatically make a restart attempt when the supply voltage returns to a level above AC 160 V and AC 75 V respectively.

PRODUCT SPECIFICATIONS

item	value
Condition	New
Warranty	1.5 years
Applicable Industries	Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company
Weight (KG)	3
Showroom Location	None
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Place of Origin	Germany
Brand Name	Siemens
Type	Gas Burner
Product name	Siemens AGQ1.1A27 Gas Burner Ignition Controller Unit Igniter Flame Amplifier For Gas Ignition Control
Model	AGQ1.1A27
Brand	Siemens
After Warranty Service	Video Technical Support
Color	black
Power consumption	4.5 VA
Mains voltage	220 V 240 V  50...60 Hz
Degree of protection	IP40
Application/Usage	Industrial Application
Mounting position	Optional

Siemens AGQ1.1A27 Gas Burner Ignition Controller Unit Igniter Flame Amplifier For Gas Ignition Control

Recommend Products

 

 

Siemens AGQ1.1A27 Gas Burner Ignition Controller Unit Igniter Flame Amplifier For Gas Ignition Control