Original Kromschroder Damper Actuators IC 40SA3D Burner Actuator For Industrial Gas Burner Parts
• For complex applications with programmable functions for flexible adjustment to the process, with statistics and fault history to support service personnel
• Position indicator that can be read externally
• Spacious connection chamber for ease of installation
• Actuators can be delivered ready installed on butterfly valves BVG, BVGF, BVA, BVAF, BVH, BVHS or linear flow control VFC
Kromschroder actuator for transmitting rotary movements (0-90°), for actuation of gas and air valves, position feedback via externally readable position indicator, enclosure IP 65
Series 40, programmable via an optical interface
Emergency closing function
Running time adjustable between 4.5 and max. 75 s
Mains voltage: 100-230 V AC, 50/60 Hz
Torque: 3 Nm
Digital inputs
Parameter set 68001, operating mode 06, 3-stage operation with one or two digital inputs, running time: 6 s
Replacing a IC 40SA3D, 88300091 actuator is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) products.
- Running time6 s
- Torque3 Nm
- Voltage100-230 V AC
- Weight, kg2
- Commodity code85011010
- Country of originDE
Original Kromschroder Damper Actuators IC 40SA3D Burner Actuator For Industrial Gas Burner Parts
|
Model
|
IC40SA3D |
| Torque |
3NM
|
| Running time |
6s
|
| Voltage |
100-230 V AC |
|
Brand
|
Kromschroder
|
1 Application
Actuator IC 40 is designed for all applications that require precise, controlled rotary movement between 0° and 90°. It can be mounted directly onto the butterfly valves BVG, BVGF, BVA, BVAF, BVH, BVHS or linear flow control VFC in order to control the gas and air flow rates on gas burners. Actuators and butterfly valves or linear flow control VFC can also be delivered ready assembled as butterfly valves with actuator IBG, IBGF, IBA, IBAF, IBH, IBHS or linear flow control IFC.
The IC 40 can be used on continuously-controlled burners and on stage-controlled burners.
Settings on the actuator IC 40 can be made using a PC with the programming software BCSoft. All the relevant settings for the process are made using the software via an optical interface. Various operating modes, which may be modified, are stored in the unit. In addition, the control type (two-point signal, three-point step signal or continuous control), running times, adjustment angles and intermediate positions can be programmed.
The actuator can also be controlled "by hand" using the software.
Once set, all the parameters can be saved on the PC and copied from there into other actuators, thus saving time during the commissioning process.
Service technicians can call up statistical data using BCSoft, such as hours of operation, actuating cycles and a fault history. Some values can also be set to zero, for example to record data over a specific period of time.
Function
The actuator IC 40 moves the butterfly valve towards 0° or 90°. There are 4 possible positions which the actuator can approach in steps. Any intermediate position is possible in continuous three-point step mode. Optionally, the actuator can also approach any intermediate position via an additional current input.
The slow flashing blue LED indicates that the motor of actuator IC 40 is moving. The position indicator on the housing indicates the opening angle. Further visualization and operation are performed on a PC using the BCSoft software.
Original Kromschroder Damper Actuators IC 40SA3D Burner Actuator For Industrial Gas Burner Parts
Audited Supplier 
){kind=link}