Giuliani or Gavr50 (2") Anello Air/Gas-Fuel Ratio Regulator Pressure Control Valves for Industry Gas Burner

• Customization: Available
• Application Fields: Industrial Gas Burner
• Certification: ISO, CE
• Model NO.: GAVR50(2")
• Condition: New
• Noise Level: Low
• Parts: Valve, Pressure Regulator
• Purpose: Adjustment Gas
• Name: Pressure Regulator Valve
• Model: Gavr50(2")
• Brand: Giuliani
• Max. Inlet Pressure: 0.2bar
• Color: Sliver
• Weight: 3kg
• Operating Temperature Range: -10--+60°c
• Ratio: 1:1
• After Warranty Service: Video Technical Support
• Application/Usage: Gas Burners Industrial Accessories
• Usage: Hydrogen, Nitrogen, Ng and LPG
• Machine Size: Medium
• Transport Package: Carton
• Specification: 20*14*14cm
• Trademark: Giuliani
• Origin: Italy
• HS Code: 8481100090
• Production Capacity: 1000

Product Description

Giuliani OR GAVR50(2") Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts

Product Description

Introduction:

If installed and maintained as per the conditions and instructions given in the enclosed technical manual, the regulator is not a source of specific danger. In particular, under normal operating conditions, the device only rarely emits inflammable substances such as to generate an explosive atmosphere. The air/gas ratio regulator can be installed solely on horizontal pipes and with regulation cap facing downwards. Keep to the gas flow direction indicated on the body of the regulation valve. The device must be fitted onto the system with suitable tools to be inserted into the hubs of the in and out holes. It is strictly forbidden to fit the regulator by levering on the sleeve of the top cover. A suitable gas filter must be installed upstream of each system. Make sure that the pipes are clean and aligned so that the regulator is not su bject to stress.
Ensure the installed regulator is not touching plastered walls.Check that the regulator is suited to the intended use. The impulse intake for the control air connection (threaded hole G¼") should be connected, via copper pipe with diameter of not less than 4 mm, downstream of the air regulation elements with distance from them normally equal to 5 times the diameter of the pipe.

DATI TECNICI

Attacchi filettati: UNI EN10226-1
Attacchi flangiati: EN 1092-4
Campo di pressione d'ingresso: da segnale di pressione +20mbar fino a 200 mbar
Segnale di pressione (aria): da 2 a 120 mbar
Rapporto di pressione aria/gas: 1:1
Minimo differenziale tra ingresso e uscita: 20 mbar
Massimo differenziale tra ingresso e uscita: 150 mbar
Raccordo linea aria: Rp ¼"
Temperature limite ambiente: -10°--+60°C
Combustibili: gas città, metano, GPL; gas non aggressivi.
Caratteristiche costruttive: compensazione della pressione di entrata,
attacco impulso interno. Vite di regolazione flusso minimo. Guarnizione di
tenuta per chiusura a zero. Prese di pressione in entrata, uscita e attacco
aria su tutti modelli.
Materiali: corpo in alluminio; parti interne in alluminio, acciaio, ottone e
materiali sintetici; membrane e guarnizioni in materiale a base di gomma NBR.

GENERAL FEATURES

 

The task of the GAVR ratio regulators is to maintain the air/gas ratio constant and to regulate the pressure to the burners. The ratio valve allows the pressure to be regulated continuously and gradually with high precision over the entire range of values at outlet. The by-pass screw built into the regulation system is for managing the minimum gas flow with continuous regulation without the need for replacing differently
drilled screws.
 The ratio regulator is driven by the pressure received from the air feed line. It regulates the outlet gas pressure with the control air pressure with a ratio of 1:1. The flow is thus completely managed via the air regulation device.
Any variations in flow due to the operation of the burner produce the same effect both on the gas and air pressure, thus maintaining the ratio constant.
GAVR's high capacity for regulation is guaranteed by the compensation diaphragm on which the inlet pressure acts and by the springs that exactly offset the weight of the shutter system, ensuring maximum sensitivity.

 

SETTING

The outlet pressure calibration is regulated by turning the adjusting pressure, and clockwise
to increase it. This regulation must be made with the air control line connected and burner operating.
In order for the device to operate correctly, the minimum difference between inlet and outlet pressure must be above 20 mbar whereas the maximum difference must be lower than 150 mbar.
 The pressure pipes upstream and downstream of the regulator and on the control air line (fig. 1-2) allow to measure the relative pressure levels .so that the device can be easily cal brated. The screw (fig. 1-2) for calibrating the device minimum load is built into the regulation system. For correct regulation, completely unscrew in an anticlockwise direction until the screw locks mechanically - in this position
there is no minimum gas flow. Slowly tighten the screw (fig.1-2) clockwise until the required value.

MAINTENANCE

Ratio regulators do not require any maintenance. In the event of a fault, a general overhaul and relative test are recommended on the manufacturer's premises.

PRODUCT SPECIFICATIONS

item	value
Condition	New
Warranty	1.5 years
Applicable Industries	Building Material Shops, Machinery Repair Shops, Food & Beverage Factory, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
Weight (KG)	3
Showroom Location	None
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Place of Origin	Italy
Brand Name	Giuliani
Type	Gas Burner
Product name	Giuliani GAVR 500 Anello Air/Gas-fuel Ratio Regulator Control Valves
Model	GAVR 50
Brand	Giuliani
Color	Silver
Ratio	1:1
Operating temperature range	-10--+60°C
max. inlet pressure	0.2Bar
Max. air inlet pressure	120mbar
Application/Usage	Gas Burners Industrial Accessories
After Warranty Service	Video technical support

Detailed Photos

Giuliani OR GAVR50(2") Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts

Recommend Products

 

 

Giuliani OR GAVR50(2") Anello Air/Gas-fuel Ratio Regulator Pressure Control Valves For Gas Burner Parts