Siemens Aga62.000A000 Connecting Cable for Actuators Skpx5/X6 Powering Both on The Double Valve Vgd...with Connector Aga64

• Usage: Hydrogen, Nitrogen
• Purpose: Connecting
• Parts: Damper Actuator
• Application Fields: Industrial Gas Burners
• Noise Level: Low
• Machine Size: Medium
• Model NO.: AGA62.000A000
• Condition: New
• Certification: ISO, CE, CCC
• Brand: Siemens
• Model: Aga62.000A000
• Name: Connecting Cable
• Material: Plastic and Stainless
• Type: Connecting Cable for Actuators Skpx5/X6
• Use: Gas Burner Accessories
• After Warranty Service: Video Technical Support
• Transport Package: Carton
• Specification: 20X6X10 cm
• Trademark: SIEMENS
• Origin: Germany
• HS Code: 8412291000
• Production Capacity: 1000

Product Description

Siemens AGA62.000A000 Connecting Cable For Actuators SKPx5/x6 Powering Both On The Double Valve VGD... With Connector AGA64

Product Description

Actuators for Gas Valves SKL25…/ SKPx5…

• ON / OFF safety shutoff feature conforming to EN 161 in connection with actuators and gas valves from Siemens

• Damped opening (rapid closing)

• Very low power consumption

• Suitable for gases of gas families I...III

• Optionally with / without end switch (factory set)

• Plug-in connection facility

• Electrical indication of operation

• Stroke indication

• Supplementary Data Sheets (refer to the Data Sheets on gas and air valves) The SKPx5... / SKL25… and this Data Sheet are intended for use by OEMs which integrate the actuators in their products.

 

Use

Actuators in general

The combination of actuator and valve provides the following functions:

- Safety shutoff valve (SKP15...)

-Safety shutoff valve with gas pressure governor / controller (SKP25..., SKP55..., and SKP75...)

The electrohydraulic actuators together with the valves are designed for use with gases of gas families I...III and air. They are used primarily on gas-fired combustion plant. The actuators open slowly and close rapidly. They can be combined with any of the above mentioned valve types and nominal valve sizes. The actuator can be supplied with end switch (for indicating the fully closed position). For information about valve sizing, refer to the «Valve sizing chart» in the Data Sheet of the relevant valve.

SKP25...

The SKP25... operates as a constant pressure governor with a setpoint spring. Its field of use is primarily forced draft gas burners -with mechanical air /fuel ratio control -with electronic air / fuel ratio control

SKP25.7...

The SKP25.7... operates like the SKP25... constant pressure governor, but features electric adjustment of the setpoint spring. Its field of use is primarily -atmospheric burners in modulating or multistage operation -individual burners or groups of burners on industrial furnaces -plant with remote control of the air ratio with burners using a direct mechanical link

SKL25...

The SKL25... actuators are of the same design as the SKP25…, but close more slowly (in 3…6 seconds). The SKL25… do not conform to the standards for gas applications and, for this reason, are
only suited for use with air.

SKP55...

The SKP55... operates as a differential pressure governor. Its field of use is
predominently -combustion plant with combined heat recovery systems -plant where pressure conditions in the burner and combustion chamber do not change in proportion to load changes -burners with adjustable air / fuel mixing devices in the burner head -plant with negative pressure levels on the gas or air side

SKP75...

The SKP75... operates as a pressure ratio controller and provides
control of the gas pressure depending on the pressure of the combustion air, ensuring that the gas / air ratio remains constant across the entire load range. Its field of use is primarily modulating forced draft gas burners.

Warning notes

To prevent injury to persons, damage to property or the environment, the following warning notes should be observed! Do not open, interfere with or modify the actuators!

• All activities (mounting, installation and service work, etc.) must be performed by qualified staff

• Check to ensure that the impulse pipes are properly fitted and tight

• Fall or shock can adversely affect the safety functions. Such actuators must not be put into operation, even if they do not exhibit any damage

• Each time work has been carried out (mounting, installation, service work, etc.), check to ensure that wiring is in an orderly state and make the safety checks as described in «Commissioning notes

• If mains voltage is fed to the end switch via the second plug-in space, protective earth must be connected to the actuator via the same plug

• Use of connectors conforming to DIN EN 175301-803-A
is mandatory

• The connectors used must feature cable strain relief

• The pump's stem must not be pulled out using the overstroke element since that part could become loose

PRODUCT SPECIFICATIONS

item	value
Condition	New
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company
Weight (KG)	1
Showroom Location	None
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Place of Origin	Germany
Brand Name	Siemens
Type	Connecting Cable
Application	As For Actuators SKPx5/x6 Accessories
Warranty	1.5 years
Product name	Siemens AGA62.000A000 Connecting Cable
Model	AGA62.000A000
Brand	SIEMENS
Color	black
Keyword	Connecting Cable
Packing	Carton Box Packing
Material	Plastic and Stainless
After Warranty Service	Video Technical Support
Type	Connecting Cable For Actuators SKPx5/x6
Application/Usage	Gas Burner Accessories

 

 

Siemens AGA62.000A000 Connecting Cable For Actuators SKPx5/x6 Powering Both On The Double Valve VGD... With Connector AGA64

Recommend Products

 

 

Siemens AGA62.000A000 Connecting Cable For Actuators SKPx5/x6 Powering Both On The Double Valve VGD... With Connector AGA64