Factory Price JATE P6097A0310 Gas Pressure Switch for Industrial Gas Burner

• Transport Package: Carton Box Packing
• Specification: 0.32KG
• Trademark: P6097A0310
• Origin: China
• Model NO.: P6097A0310
• HS Code: 8481100090

Product Description

Product Description

 

Model	P6097A0310
Brand	JATE
Origin	China
Condition	New
HS Code	8481100090

FEATURES
* For use with natural gas, liquid propane (LP) gas, or air.
* Diaphragm-actuated safety-limit switch.
* Switch can be wired to turn on alarm.
* C6097A models break control circuit at setpoint on pressure fall.
* C6097B models break control circuit at setpoint on pressure rise.
* Lockout with manual reset and recycle options.
* Lockout models have external manual reset button.
* Removable transparent cover protects scaleplate and adjusting knob.
* Pipe tappings allow selection of positive pressure, differential pressure (air only) or venting connections (NPT mount only).
* 1/4 in. NPT or flange mount models for direct mounting to Honeywell Integrated Valve Train.
* Optional switch position indicator lamp available.
* IP54 enclosure standard.
* Ranges: 0.4 to 5 in. wc, 3 to 21 in. wc, 12 to 60 in. wc or 1.5 to 7 psi.
* Surge orifice.
* Integral Vent Limiter (all models

Installation:

Installing the Position Indication Lamp Kit
(See Fig. 4)
1. Remove the cover from the C6097 by removing the screws in the upper left and lower right quadrants of the
cover.
2. Place the lamp in the slot to the right of the dial, in the upper right-hand corner of the C6097, with the base
down. Run the two lamp wires through the slit in the upper left corner of the lamp slot.
3. Place the nut in the hexagonal depression in the lower left-hand corner of the C6097.
4. Place the terminal plate over the nut and fasten the terminal plate to the C6097 with the screw through the
bottom hole in the terminal plate.
5. Place the captive screw through the terminal lug on the shorter wire and fasten the wire to the terminal plate with
the captive screw secured by the nut under the terminal
plate.
6. Using Fig. 5 or 6 for reference, fasten the terminal lug on the longer lamp wire to either the normally open (NO) or
normally closed (NC) terminal of the C6097.

Packaging & Shipping

 

Company Profile