Original JATE Jet Gas Burner,TBJ-200A20 Gas Industrial Burners for Industrial Wide Application
Product Overview
|
Model
|
TBJ-200A20
|
|
Gross Weight
|
Volue weight 140kg
|
|
Fan power
|
0.75KW
|
|
Maximum Thermal Power
|
About 300,000Kcal/hr
|
Basic Introduction:
It belongs to the TBJ jet -type burning machine. The TBJ jet -type burning machine design makes the thermal energy very uniformly distributed in the thermal air system; the high -proportion of the stepless firepower adjusts energy saving to achieve the effect of precise temperature control, rapid warmth and energy saving. It is a new type of burning machine designed by high -efficiency air heating -type automatic gas burning machine, which is designed in the industrial process. Multi -air -mixed combustion methods are used to combine complete and save energy (gas). A complete combustion fan is installed after the steel shell of the burner. By supplying appropriate air supply and wind pressure, when the flow rate of the air duct changes in a large range, the fan does not need to install the flow speed plate around the burner.
|
|
| |
|
| |
|
Original JATE Jet Gas Burner,TBJ-200A20 Gas Industrial Burners for Industrial Wide Application
FEATURES AT A GLANCE
Special: The structure of the structure is compactly controlled by gas and air, and the detection device and ignition device are combined. Burning stabilizer uses a mixture of fire spraying, so it will not cause reverse fire and can get stable combustion in a large range. Large adjustment can get a large adjustment ratio than this burner. Burning adjustment is easy to adjust as long as it is adjusted according to the pressure of the indicator. Maintenance is simple and convenient to open directly from the outside to perform the burner, ignition, detection rod, mixed nozzle, etc.
Working Principle :
Preparation: Open the pipeline gas source ball valve, adjust the secondary pressure decompression valve, and see if the parameters of the micro -pressure meter pointer are normal; Fan three -phase 380V power start; Wind pressure switch to detect whether the wind pressure is normal; the gas switch to detect whether the air pressure is normal. These two tests are performed at the same time, such as faults, directly alarm, and do not perform the next step. Wind pressure and air pressure detection normal, delay 40 seconds, give signals to external circulating fans, and scan forward to prevent explosion shocks. After blowing, start ignition. At the same time, the power supply of the fire transformer, the safety solenoid valve, and the small thermal electromagnetic valve is given. The other main fire solenoid valve is disconnected in this process. If the flame is not monitored, the flame signal cannot be sensing, that is, the ignition fails. This machine ignits once, and the sensing signal is not allowed to be sensing in 3-5 seconds, that is, the output fault signal. In If the flame signal is sensing, the ignition is successful. At this time, it will be given another main thermal electromagnetic valve power supply to output a fire signal. At the same time, the proportional motor 4-20mA current signal is given to the fire, that is, turning the fire and starting to burn normally.
Safety control function:
Automatic ignition, automatically call the po lice without fire, and turn off the gas.
There is a point function at the flameout.
Burning windmill wind pressure is insufficient.
There is an automatic furnace before booting to prevent explosion shocks.
The shutdown has an automatic sweeping function.
Insufficient gas pressure automatically alarm
The temperature exceeds the set limit and automatically stops burning
The proportional number shows temperature chain control
PRODUCT CONFIGURATION
Original JATE Jet Gas Burner,TBJ-200A20 Gas Industrial Burners for Industrial Wide Application
System running program:
Close circuit, turn on the gas ball valve, and set the required temperature.
After starting the cycle fan, the burning opportunity works in accordance with the scheduled procedures.
Within a few seconds (8-15) for a few seconds (8-15) in the furnace, the program controller automatically wakes up the fans exit pressure. If the pressure of the fans does not reach the pressure set by the wind pressure detector, the program controller will immediately turn off the burning machine and lock and alarm. It is necessary to manually eliminate the failure before entering the next step.
During the pre -blowing time, the program controller will automatically inspect the gas export pressure at the same time. If the pressure of the gas is too high or too low, the program controller will immediately turn off the burning machine and lock itself and call the alarm. Only after manually eliminate the fault, it can only be manually eliminated by the failure before the failure. Enter the next step.
After the wind pressure and gas pressure are normal, the burning machine starts to work, the fire electrode is released from the electric spark, the mother fire is lit, and the ion flame detection needle is performed for flame detection. The program controller will turn off the burning machine within 5 seconds and lock and alarm. It is necessary to manually eliminate the failure before entering the next step.
After the mother fire was ordered, after the ion stick or UV detector detected the flame, the burning machine entered the normal working state. For the second -stage burning machine, the first fire was normal. In the warming state, for the proportional burning machine, the mother fire lits normal. After the delay is delayed, the proportional valve is slowly turned on, and the proportional adjustment is adjusted to add a mild proportion to adjust the insulation status.
Turn off the burning machine. The program controller will automatically enter the delayed cold furnace to stop processing. When the temperature in the furnace is lower than 80 ° C, it will turn off.
Audited Supplier 
){kind=link}
){kind=link}